Your cart

No products in the cart.

Your cart

No products in the cart.

Your cart

No products in the cart.

LED Emergency Lighting

LED lighting courtesy for emergency cases

INSTALLATION OF EMERGENCY KIT ASSOCIEATED TO LED LUMINARIES AND LED STRIPS

Permanent use (the luminary operates normally with its driver and also under specific conditions when there is a general mains failure)

Non-permanent use (the luminary is installed without a driver and only works under specific conditions when there is a general mains failure)

In the frequently asked questions section, you can find information on technical and installation conditions.

IMPORTANT: The LED luminary the emergency kit will be used for must be clearly indicated because when the LED luminary has been supplied by JISO ILUMINACIÓN, SL., additional connector cables may be provided in order to avoid handling of the driver output and the luminary input.

WARNING: The LED luminary set + emergency kit do not make up official emergency units according to regulations. They simply provide you with a back-up luminary of between 3W and 7W when they become activated during failures of the general power supply.

Physical conditions. The units used as an emergency kit (2DCLEDK1 and 2DCLEDK2), as well as the batteries which may be used, have the following dimensions:

WARNING: Due to the aforementioned, it may be the case that, even if the luminary and the emergency kit are compatible, the unit and/or batteries won’t fit the cut-out hole made for the  LED luminary, and therefore will not be able to be installed together.

To avoid problems during installation, we urge you to pay attention to the following table of height restrictions of false ceilings in relation to the diameter of the hole. As well as the height restriction, you must allow for lateral access because if the false ceiling has obstacles, it may not be possible to insert the emergency kit.

Recommendations for Use

The LED luminaire + emergency kit set is not an emergency luminaire according to regulations. It simply allows for courtesy lighting, between 3W and 7W, in situations in which a failure in the general power supply activates the set. It is therefore not recommended for emergency use, according to regulations.

Conditions for Use

– Needs L and N power plus two control signal cables.

– The control signal cable needs to be powered from a point (DALI bus).

– Access to the configuration software is necessary.

– The dimmer switches must indicate that they are compatible with the DALI protocol.

Recommendations for Use 

– New or existing installations, in which it is possible to install the control cables.

– Installations in which the installer has sufficient knowledge in order to perform the installation and configure it.

– Professional installations in which the client is willing to invest both in the luminaires and in the control systems.

– In installations in which there is already a pre-established home automation and that this is intended to be expanded with the lighting.

– Very professional facilities of a level and kind that require this degree of technology.

– In large installations with centralised control.

– Installations for clients who are conscious of saving energy and caring for the environment.

DO YOU HAVE A QUESTION?

Time zones mean nothing at La-Luce with our partners having 24hr a day access to quotations, product support and order status updates. LA-Luce products are assembled at our production facility near Milan Italy and we offer a five year extended warranty on selected products. We take pride in our aftersales support, maintaining exceptional relationships with key specifiers and contractors.

    Up
    q

    Lumoo is a global architectural lighting
    company based in Copenhagen

    Showroom & Store

    2078 Stonepot Road Newark 101 Kensington Drive, Great Holm, MK8 9BW

    Opening Hours

    monday

    Closed

    saturday

    10 - 16

    Tuesday - Friday

    10 - 18

    q

    Subscribe to Newsletter